Differentiate

The Differentiate I/O differentiates the source's data. The output is proportional to rate of change of the input. For example, if a source has the unit V, the output of the DIFF will have unit V/s. The output range can be changed and fixed to user defined values.

The typical application of the Differentiate I/O is to use it as part of larger, more complex mathematical operations.

Hint: The differentiate operation is very sensitive to noise, because noise in most cases has a higher frequency than the signal of interest. To minimize the effect of noise, add a low-pass filter processing block before or after the differentiate block. In case you are measuring a periodic triggered signal, you can also use an average I/O, which will give better results than filtering.

Common properties and actions

To control the behavior of the Differentiate I/O, several properties are available. These can be accessed through a popup menu which is shown when the I/O is right clicked in the Object screen. The properties can also be accessed through its settings window which is shown when the I/O is double clicked in the Object screen. To open the Object screen, click the Show object screen button.

Window control

By default, the settings window only shows the most used settings. When Advanced is ticked, the extended window with all settings is shown. See also the program settings.

For more information, see common properties and actions.

Common properties and actions

Related information

Gain / Offset

Add / Subtract

Multiply / Divide

Sqrt

ABS

Integrate

Logarithm

Average